cree xm-l color series features a pplications > red, green, blue and white in a single 5 mm x 5 mm package > architectural > maximum drive current per led die: 1 a > entertainment > individually addressable leds > vehicle > electrically neutral thermal path flux characteristics @ 25c color dwl (nm) or cct (typ.) kit used red 620-635 green 520-535 royal blue 450-465 cool white 5700-8000 neutral white 3700-4300 characteristics unit minimum typical maximum viewing angle (fwhm) degrees 130 thermal resistance, junction to solder point c/w 3.5 esd classification (hbm per mil-std-883d) class 2 led junction temperature c 150 temperature coefficient of voltage - red mv/c -1.8 temperature coefficient of voltage - green mv/c -4 temperature coefficient of voltage - blue, white mv/c -3 reverse voltage - red, green, blue, white v 2.25 2.6 reverse voltage - green v 3.3 3.9 reverse voltage - blue, white v 3.1 3.7 it is highly recommended for the user to review the cree series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/arrays-directional/xlamp-xml-color cree xm-l color series on board min.flux (lm) @350ma 45.7 87.4 cree xlamp xm-l color leds are the brightest and smallest multi-colored leds of their class, delivering red, green, royal-blue and white in one led at twice the lumens-per-dollar of the mc-e color led. the xm-l color led is 60% smaller than the mc-e led, reducing the distance between led die to create a small optical source for excellent optical control, efficient color mixing and simplified design. 13.9 80-100 80-100 c3abc02 (6000k) c2abcb1 (4000k) global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
hardware (not included) > mount with #4 machine screws. > 16awg maximum wire gauge. > use only with constant current power supplies. pcb fabrication > layer count: 1 > core material: 6061-t6 aluminum > single layer copper weight: 1oz > solder mask: white > finishing plating: pb free hasl * exceeding maximum ratings may damage the led and cause potential safety hazards. * elevated operating temperatures can be expected to negatively impact the service life (lumen output) * all data is related to entire assembly. data reflects statistical mean values. actual data may differ depending on variances in the manufacturing process. * end users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. note 1: using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. note 2: the thermal resistance from the led junction to ambient temperature, rth(j-a), should be kept below 10c/w so that the led is not exposed to a condition beyond the absolute maximum ratings. note 3: the temperature of the led assembly must be measured at the tc-point according to en60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. cree xm-l color series on board global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
|